Attention: Effective November 9, you must present evidence of a negative Covid-19 test upon arrival for fittings at The Golf Performance Center. The test results must show that the test was taken no less than 72 hours from the date of your fitting.

Gole Performance center Custom Clubs

The GPC Custom Clubs fitting experience will help you gain trust in your equipment and the confidence to play your best.

 

Our knowledgeable and expert staff has been skillfully fitting and fine-tuning clubs for over 20 years, and incorporate the newest technologies such as GEARS, K-Vest, TrackMan, and SAM PuttLab to create the best fit for you.

 

With our onsite build center and vast inventory, we personally handcraft your custom-fit equipment through partnerships with premier manufacturers and brands.

Expert Fit. UNDENIABLE RESULTS.

THE GPC FITTING PROCESS

1

EVALUATE CURRENT EQUIPMENT

Player interview & warm up. Current equipment DNA test to determine current set make-up and specifications. TrackMan and Gears data capture of current equipment used to determine baseline for fitting.

2

THE ART OF FITTING

Using TrackMan and GC-Quad Launch Monitors, our clubfitters guide the player through the clubfitting process. Navigating through the different product lines from all major manufacturers, to determine the best combination of equipment and specifications for your game.

3

GREEN GRASS VERIFICATION

Our ability to provide both an indoor controlled environment and an outdoor golf course environment in each of our fitting experiences is what gives you true peace of mind when buying new equipment.

4

THE BUILD PROCESS

To ensure the highest quality control, your new clubs are custom built to specification on site in our state-of-the-art build shop by our expert club builders. Not only can your clubs be ready on the same day, you will also receive a detailed digital summary of your fitting experience via email.

BRANDS WE CARRY

Custom Clubs Brands

GPC FITTING EXPERIENCES

img

THE FULL SWING EXPERIENCE (DRIVER, FAIRWAY WOODS, HYBRIDS & IRONS)

All full swing Fitting Experiences utilize an unmatched combination of industry best technology, including GEARS 3D Motion Capture System, TrackMan radar-based club and ball tracking technology and Foresight GC Quad camera-based launch monitor. This technology, paired with our Class A PGA expert clubfitters and our extensive selection of premium brands, enable us to provide a completely unique and unrivaled experience that you will not find anywhere else.

Request a Quote

THE WEDGE EXPERIENCE

In addition to the technology utilized in our Full Swing Experience, the Wedge Experience is conducted outdoors on our short course – GPC National. This green grass environment is ideal for wedge fitting with eleven different greens that provide an array of real world situations that you will be faced with on any course. We carry all major wedge brands, and use premium golf balls to ensure we are getting the most accurate representation of the real world environment.

Request a Quote

img
img

THE PUTTER EXPERIENCE

The Putter Fitting Experience is done in our state-of-the-art putting studio, where we utilize the Edel Putter Fitting System, as well as SAM Putt Lab and TrackMan Putting, in addition we carry all major brands of putters. We will find the best combination of head shape, weight, sight lines, length, lie and loft to maximize your individual putting technique.

Request a Quote

GOLF BALL FITTING EXPERIENCE

The golf ball is the only piece of equipment you use on every shot and there are many game-changing performance and quality differences between various brands and models. We believe that a proper golf ball fitting takes place on the golf course, and the Titleist Tour-validated “Green-to-Tee” approach successfully fits players of all abilities, from the world’s best to high-handicap amateurs.

Request a Quote

img
img

Equipment Categories Available: Driver, Fairway Woods, Hybrids, Irons, Wedge, Putter

  • Single Category Fitting Experience – 2 hours in length
  • Duel Category Fitting Experience – 3 hours in length
  • Full Bag Fitting Experience – 4 hours experience
  • Golf Ball Fitting Experience – 1 hour experience

Request a Quote

FULL DAY – TOUR FITTING EXPERIENCE 9AM-5PM

At GPC, we take equipment seriously, that is why it is one of our Five Elements of Success. This is an all encompassing, total game experience, inspired by the process that major manufacturers utilize to fit their PGA Tour Players. We are bringing this one of a kind fitting experience normally reserved for the best players in the world to GPC. The day includes complimentary breakfast, lunch, a performance gift pack, and an on course verification process to fine tune your new equipment for real world situations.

imgimgimgimg

ONE DAY – TOUR FITTING EXPERIENCE

9AM – Player Profile

A comprehensive interview process designed to pinpoint the players equipment needs and wants and current strengths and weaknesses of each facet of their game.

 

9:30AM – Equipment DNA Test & Warm Up

While the player warms up, the fitter performs a DNA Test of the player’s current equipment to document his/her current specs. This test may expose potential issues within the current set make up. This warm-up session will also serve as a TrackMan baseline for the fitting experience.

 

10AM – GEARS 3D Motion Capture

We utilize our state-of-the-art GEARS 3D System to measure your current clubs, specifically how the shaft is loading and unloading at three key moments in the swing:

    1. Maximum bend in transition
    2. Shaft parallel to ground in downswing
    3. Impact

 

11AM – Long Game Fitting

Our Class A PGA clubfitters guide the player through the current wood, hybrid and iron lines from all major manufacturers, to determine the best combination of head, shaft, grip, length, lie, loft and set make-up.

 

1:30PM – Lunch

 

2:15PM – Putter Fitting

Our expert clubfitters guide the player through the current equipment lines from all major manufacturers, to determine the best combination of head, shaft, grip, length, lie, loft and set make-up.

 

3:15PM – Wedge Fitting

Yardage gapping your wedges by making sure that your lofts are gapped correctly between wedges.  Also determine the set make-up of your wedge set.  Then hitting a variety of different shots around the green and from the bunker to determine which bounce and grind combination is best for your game.

 

4:30PM – Green Grass Verification

Once we have solidified our choices, we head out to the course for our green grass verification process. Here, we can see if any fine tuning is needed for real world situations.

 

5:30PM – Closing Presentation & Performance Pack

After all clubs and specs have been confirmed, we will walk you through the summary of the day, answer questions and confirm any orders that may need to be placed.

 

Results Summary Packet

  • Current Equipment DNA Test Results
  • Gears Before & After Summary
  • TrackMan Before & After Summary
  • Summary of new equipment and custom specifications

Request a Quote

Putting Studio

The GPC Putting Studio offers one of the finest putting experiences in the Northeast:
It’s fully equipped with state-of-the-art technology including:

  • Quintic Ball Roll – one of only three  Quintic accredited putting centers in New England
  • SAM PuttLab
  • V1 5 camera video analysis system
  • Laser alignment system
  • Visio training aids

GPC Custom Clubs Tour Trailer

CC Trailer

Elevate your next Member/Guest, Demo Day, corporate event or party by booking the Custom Clubs Tour Trailer. Our fitting experts and sleek trailer always draw a crowd, creating an extraordinary experience for your guests.

We can meet all your club fitting and club building needs right on site! With unlimited customization options, we can provide your guests with a “tour” level experience during your next event.

 

Contact us to let us help you customize your experience!

 

SERVICES OFFERED:

Wedge Stamping

Fitting Experience

Reshafting

GPC Map

824 Ethan Allen Highway Ridgefield, CT 06877

203.790.4653

thegolfperformancecenter.com/customclubs

Follow us on Instagram: @gpccustomclubs

What our Custom Clubs Customers are saying

"I was up there today to get fitted for a new set of irons. I wasn’t disappointed. I love their attention to detail. I left and came back two hours later, and my new irons were ready. Unbelievable service."


Eoin L

S.W.A.G Customer

Our Master Club Fitters

Nick and Gabe in Custom Clubs Trailer
Down Load Brochure for The Golf Performance Center’s Ridgefield, CT